Misla
Skip to results

Parts for around the home

STL files for hooks, cable clips and caps, each cut to the door, desk or leg you measure.

11 parts

Sort:
Filter

  1. Over-door hook

    A hook that sits over the top of a door with no screws, cut to the thickness of your door and as far down as you want it.

    What you need A calliper for the thickness of your door, and a ruler for how far down you want the hook.

    Try your numbers

  2. End cap for a tube or pipe

    A plug or a cap for the open end of a tube, pipe or tubular leg, drawn from the diameter you measure.

    What you need A calliper for the inside or outside diameter of the tube.

    Try your numbers

  3. Desk edge cable clip

    A clip that slides over the edge of your desk and keeps one to four cables in round channels, cut to the thickness of your desk and your cables.

    What you need A calliper for the desk top and your thickest cable, and how many channels you want.

    Try your numbers

  4. Leg cap

    A cap for the foot of a chair or table leg, round or rectangular, cut to the size of your leg.

    What you need A calliper for the bottom of your chair or table leg.

    Try your numbers

  5. Corner cap

    A cap that slides over the corner of a table top and rounds it off, cut to the thickness of your top.

    What you need A calliper for the thickness of your table top.

    Try your numbers

  6. Levelling wedge or shim

    A wedge or a flat shim for under a foot, drawn from the two heights you measure.

    What you need The gap under the foot at both ends, with a calliper's depth rod.

    Try your numbers

  7. Drain cover

    A cover with holes or slots for a round or square floor drain, drawn from the opening you measure.

    What you need A calliper or a ruler for the opening of the drain.

    Try your numbers

  8. Toothbrush holder

    A row of round sockets for toothbrushes, sized from the widest handle you measure.

    What you need A calliper for the widest toothbrush handle.

    Try your numbers

  9. Drawer divider

    A divider that clips over the sides of a drawer, cut to the inside width and height of your drawer and the thickness of its sides.

    What you need A ruler for the inside width and height of the drawer, and a calliper for the thickness of its sides.

    Try your numbers

  10. Wall holder for a remote control

    A pocket on the wall that a remote control drops into, cut to the width and thickness of your remote and hung on two screws.

    What you need A calliper for the width and thickness of your remote and for the screws you will hang it on.

    Try your numbers

  11. Door wedge

    A wedge for under a door, cut to the gap between your door and the floor.

    What you need A ruler for the gap between the floor and the bottom of your door.

    Try your numbers

What are you trying to fix?