Measure your glass and the handle of your net, choose how far down the glass you want it held, and we will cut a holder for that tank and that net. It slides over the top edge of the glass, and the handle drops into an upright channel drawn to its own shape — round or flat. It prints upside down, with no supports.
Rendered at our default measurements — yours comes out to your numbers.What you need before you start
What it will take
Glass thickness: 3–19 mm
Handle width: 4–25 mm
Handle thickness: 3–20 mm
How far the holder reaches down the glass: 15–80 mm
Nozzle size: 4 to choose from
Filament: 4 to choose from
As it comes
Slot for the glass6.4 mm
Channel, along the glass10.6 mm
Channel, away from the glass6.6 mm
Filament, at most (printed solid)6 g
Build plate: 22 mm as it comes, never more than 256 mm.
What you need to hand
A calliper for the glass, near the top edge where the holder will go.
A calliper across the handle of your net, both ways, where the holder will hold it.
How far down the glass you want the handle held.
Your nozzle size and the filament you will print it in.
A holder that slides over the edge of your glass and keeps a glass or digital thermometer upright at the depth you choose, cut to your glass and your thermometer.
What you need A calliper for the glass and across your thermometer.
